Brady 300X-PLUS Bedienungsanleitung PDF herunterladen (Seite 52)

46 User Manual Edition 04/10

BP-PR PLUS Series

6-1-2 Copying New Firmware from Memory Card

1. Format CompactFlash memory card in printer (see 8-2 Formatting on page 51.).

The directories "fonts", "images", "labels" and "misc" are created on the memory

card here.

2. Copy the firmware file to the "misc" directory in a CompactFlash drive.

3. Insert the prepared memory card into the printer.

4. Press the menu button.

5. Select Service > Firmw. fr. card menu.

6. Press the  button.

7. If the function Firmw. fr. card is protected via a PIN, use the buttons

, ,  and  to enter the code number and confirm with the  button.

The names of the firmware files found on the memory card are shown in the

display.

8. If several firmware files are found on the memory card, select the desired file with

the  and  buttons.

9. Press the  button. The selected firmware file is copied. A progress indicator is

displayed while the firmware is being copied. OK appears in the display once

copying is successfully completed.

10. Press the  button.

6-1-3 Error Messages during the Firmware Update

If an error occurs during the update, one of the following error codes is shown in the

display:

Table 19. Possible Error Codes with a Firmware Update

Error code Meaning

Checksum error. /b may have been forgotten in the COPY command or the file is

defective.

Header error. /b may have been forgotten in the COPY command or the file is

defective.

EPROM could not be cleared.

Programming voltage is too low.

Programming error.

If an error occurs with a firmware update, the old firmware version is no longer

usable. Restart programming in this case.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 66 67

Keine Kommentare

Brady 300X-PLUS Bedienungsanleitung Seite 52