Brady 300X-PLUS Bedienungsanleitung PDF herunterladen (Seite 14)

8 User Manual Edition 04/10

BP-PR PLUS Series

Table 4. Permissible Label Dimensions

1-6-3 Transfer Ribbons

Select transfer ribbons which are only a little wider than the labels:

• If a ribbon is too narrow, the printhead comes into contact with the labels  wear

• If a ribbon is too wide, there is a risk of wrinkling _ print image errors

Detection of the transfer ribbon occurs via checking the rotation of the transfer ribbon

supply hub. To print all labels up to the end of the transfer ribbon cleanly, the trailer tape

may not be longer than 60 mm. It must be possible to easily remove the end of the transfer

ribbon from the cardboard core.

Dim. Designation Dimensions in [mm]

A Label width Label width in peel-off mode 4–116 25–116

Width of liner or endless medium With a medium thickness of

E = 0.07 – 0.25 With a medium thickness of E = 0.25 – 0.35

25–120 10–120

Label height Minimum label height Minimum label height in

peel-off mode Maximum label height with printhead 203 dpi

Maximum label height with printhead 300 dpi Maximum label

height with printhead 600 dpi

5 12 2000 2000 1000

D Label gap 2–1000

E Label thickness 0.07–0.35

F Liner thickness 0.07–0.35

G Distance from 1st heating point to edge of liner 2

H Distance from label sensor to edge of liner 5–53

I Width of perforation mark >5

K Height of perforation mark 2–10

L Width of reflex mark >5

M Height of reflex mark 2–10

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 66 67

Keine Kommentare

Brady 300X-PLUS Bedienungsanleitung Seite 14