Brady 300X-PLUS Bedienungsanleitung PDF herunterladen (Seite 51)

Edition 06/10 User Manual 45

BP-PR PLUS Series

6 Service Functions

6-1 Performing Firmware Update

The firmware of the printer is saved in a Flash EPROM. You can update the firmware

using the following functions:

• Firmware upd.: Copy a firmware file from a computer connected to one of the

interfaces of a printer (see 6-1-1 Copying New Firmware via Interface on page

45).

• Firmw. fr. card: Copy a firmware file from a memory card (see 6-1-2 Copying New

Firmware from Memory Card on page 46).

• FTP firmware update via printer management (see 7-3 FTP Firmware Update on

page 49).

The firmware file can be obtained from the internet.

6-1-1 Copying New Firmware via Interface

1. Press the menu button.

2. Select Service > Firmware upd. menu.

3. Press the button.

The Firmware-Upd message appears in the display.

4. Press the  button.

5. If the function Firmware upd. is protected via a PIN, use the buttons

, ,  and  to enter the code number and confirm with the  button.

6. Open the DOS input window on the PC.

7. Configure the serial interface of the PC with the mode command. Enter the

command mode com1: baud=115200 parity=n data=8 stop=1, for example

8. Send the firmware file (e.g. 303_6518.x2) to the printer. Enter the command

copy /b 304_6727.x2 com1: for example.

A progress indicator is displayed while the firmware is being copied. OK appears

in the display once copying is successfully completed.

9. Press the  button.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 66 67

Keine Kommentare

Brady 300X-PLUS Bedienungsanleitung Seite 51