Brady BRADYMARKER XC Plus Bedienungsanleitung PDF herunterladen (Seite 11)

Page

BRADYMARKER™ PS printer

(continued)

4. Reverse direction and turn the roll “forward”. Feed material into printer until it stops. The

leading edge will now be positioned against the drive roller.

5. While continuing to hold the roll so that the leading edge is pushed tightly against the drive

roll, press and hold the FEED key. The drive roller will begin to pull markers into the

printer. Continue to hold the FEED key until the leading edge of the roll becomes visible

through the slot in the top of the printer cover.

6. Release the FEED key. The printer should advance to the top of the first available

PermaSleeve marker. You are now ready to enter legends and print sleeves.

WARNING - NEVER try to remove any Bradymarker label or sleeve by

pulling them out of the rear of the printer. The printer drive is one-way only.

To remove markers, insert a scissors in the “slot for scissors” in the unwind

assembly (see Fig. B), cut through the carrier between sleeves, and pull the

sleeve out though the top of the printer.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Keine Kommentare

Brady BRADYMARKER XC Plus Bedienungsanleitung Seite 11