
File Location
Wraptor supports two file locations: Memory Card and Internal Memory.
♦ If you select Memory Card, the File tab menu displays print file names in the “Spool” subdirectory on
the CompactFlash Memory Card.
♦ If you select Internal Memory, the File tab menu displays print file names in the Wraptor’s internal
memory.
Remote Control
This button toggles between Remote Control and Local Control. Remote Control allows another computer
to take control and operate the Wraptor via the Wraptor Programming Language. Note: You can also use
the touch screen in remote control mode. See the Wraptor Programmer’s Guide for the details of the remote
control feature. Local Control allows you to control the Wraptor via the touch screen.
NOTE: Remote control uses the serial port to communicate with the Wraptor. Therefore, the
Connection Type cannot be Serial when remote control is in use.
5.3.6 IP Tab Commands
The IP tab menu (Figure 21) is used to set up communications between the computer and Wraptor unit on a
local area network. The settings in this menu are required only for the TCP Connection Type, not for Serial,
USB, or None.
Figure 21. IP Tab Menu
NOTE: Consult your network or site administrator to obtain the IP settings for
DNS, WINS, Gateway, etc.
Wraptor supports two types of TCP connections:
♦ DHCP (or dynamic) addressing. DHCP addressing is simpler and requires less information to configure.
♦ Fixed IP addressing.
The following table lists the information required for DHCP and Fixed IP addressing schemes:
Wraptor™ User’s Guide 37
Kommentare zu diesen Handbüchern